GOVERNMENT OF INDIA


MINISTRY OF SMALL SCALE INDUSTRIES


FIELD TESTING STATION,KOLHAPUR

NABL

ACCREDITED LAB

 

 





 





 





 





 





 





 





 





 





 





 





 





 





 





 

Our Charges

Our charges are nominal and promotional in nature. The charges have been calculated taking into account facilities cost, overheads and the services of the trained technical man power. The medium scale industries, Large scale industries, unregistered small scale units, dealers and other organizations will be charged 25 percent extra over and above the rates charged for registered small scale units. 

 

PHYSICAL / MECHANICAL TESTING CHARGES

CHEMICAL TESTING CHARGES

 

PHYSICAL / MECHANICAL TESTING CHARGES

Sr.No  Particulars of Testing SSI Units. Non-SSI 
1.

Tensile Test / Elongation on Machined Sample

Rs. Rs.
A Flat, Round, Sheet, Strip Angles, Tee, Hexagonal wires, Construction Tor Steel Bar/ TMT bars, Ferrous and Non - Ferrous products (other than tubes and pipes.)  100 125
B Testing of above products with stress, strain, Graph. 160 200
C Pipes and Tubes 140 175
D Rubber, Ebonite, Plastic (Each Direction on-Normal condition). 100 125
2 Breaking Load Test of Ferrous and Non-Ferrous products. 120 150
3 Breaking Load Test of Plywood Plastic, Rubber and Non-metallic products 80 100
4 Flatening Test on machines Sample 100 125
5 Crushing Strength Test. 100 125
6 Compression Test 125 156
7 Bend Test( Machined Sample )
A Cold Bend on Ferrous product other than Pipe and Tubes. 80 100
B Cold Bend on Pipes and Tubes 100 125
C Rebend. 140 175
8 Transverse Test on machined Sample. (Measurement of Deflection) 130 163
9 Breaking Load Test for Welded Sample 120 150
10 Shear Test 120 150
11 Hardness Test.
A Rockwell and Shore (A & D) 70 88
B Vickers and Brinell 70 88
C Survey of Hardness 400 500
12

Impact Test

A At Room Temp. 100 125
B Required Temp. 200 250
13 Microstructure Test (Ferrous & Non-Ferrous)
A Micro Examination 240 300
B Measurement of Case Depth / Metal Coating 240 300
C Measurement of Grain Size / Particle Size / inclusion rating 240 300
D Micro Hardness Test 350 438

Service Tax Extra

 

CHEMICAL TESTING CHARGES
1. Chemical Analysis of Ferrous/Non -Ferrous metals. Rs. Rs.
A Carbon Steel (5 elements) analysis.. 755 945
B Analysis of carbon %, Si.%, Mn.%, S%, P% each individual element. 160 200
C Alloy steel complete analysis 7 elements (C.,Si.,Mn,S,P,Cr,Ni.) 900 1125
D Non ferrous Metal Analysis like Cu.,Ag, Zn, Sn, Pb, Etc. (Individual element each) 160 200
2 Chemical analysis of Ferro alloys like FeSi, FeMn, FeCr, FeP, FeMo, Silico Mn, Ni Scrap, Pure Ni, etc. (Individual elements each). 160 200
3 Chemical Analysis of calcium, Petrolium Coke/Foundry Coke/Coal dust. etc.
A Ash % 100 125
B V.M. % 80 100
C S % 160 200
D Free Carbon % (Fixed Carbon) 160 200

E

Moisture% 100 125
4 Analysis of Silica Sand.  Washed Sand/System Sand
A Mesh No. 160 200
B Clay like Total Clay, Dead Clay, Active Clay Etc. 160 200
C Moisture % 100 125
D Loss of Ignition 100 125
5 Chemical analysis of sodium silicate (Na2O3/SiO2) 160 200
6 Analysis of Bentonite (Gel Mark / Swelling Index ) 160 200
7 Analysis of Cyanide Bath sample 75 94
8 pH Value 100 125
9 Chemical Analysis of Magnesite Bricks/ Raming Mass (Acidic & Basic)/ Thermoset etc.
A SiO2 % 160 each 200 each
B CaO % 160 each 200 each
C Mgo % 160 each 200 each

 Service Tax Extra

QUALITY IS NOT A MATTER OF CHANCE. TESTING ENSURES QUALITY.